Outgoing Messages - switel DET177X Bedienungsanleitung

Answering Machine

Outgoing messages

Proceed as follows to open the answering machine OGM Setting menu:

+ or , TAM SETTINGS , 
+ or , OGM SETTING , 
Selecting the answering mode
The answering machine is provided with two, pre−recorded outgoing messages. A distinction is made be-
tween outgoing message with message recording (OGM 1) and outgoing message only (OGM 2). If
no other outgoing message is recorded, the pre−recorded outgoing message is played automatically. When
the answering machine memory is full, it automatically reverts to outgoing message only (OGM 2) explain-
ing to the caller that messages cannot be left.
Proceed as follows to change the outgoing message:
Using the base station:
2 sec @
n
or
n
The outgoing message currently set is played and saved.
Usin the handset TAM Settings menu:
+ or , ANS MODE , 
+ or ,
e.g.: ANS AND REC , 
Recording outgoing messages
Your own outgoing message must be a minimum of 5 seconds and a maximum of 3 minutes. The respect-
ive, pre−recorded outgoing message is replaced by the one you record. The pre−recorded outgoing mess-
ages can be restored simply by deleting your own outgoing messages (. Page 101).
Via the base station:
2 sec @
Press and hold nor m
{ì}, ð
Release nor m
Using the handset TAM Settings menu:
+ or , RECORD OGM , 
+ or ,
e.g.: ANS AND REC , 
{í}, ð
#
100
All manuals and user guides at all-guides.com
Open the main menu
Open the TAM Settings menu
Open the OGM Setting menu
Open the answering mode selection function
Activate OGM 1 (with message recording)
Activate OGM 2 (without message recording)
Select the function and confirm it
Select the outgoing message and confirm it
Open the answering mode selection function
Start recording OGM 1 or OGM 2
Speak your message after the acoustic signal
End recording OGM 1 or OGM 2
Select the function and confirm it
Select OGM 1 or OGM 2 and confirm it
Speak your message after the acoustic signal
End recording