Cleaning The Filter Insert; Storage; Disposal/Environmental Protection - Parkside PNTS 1500 B3 Originalbetriebsanleitung

GB

Cleaning the filter insert

Check the filter insert for dirt once or twice
per year.
1. Open the cover (27) on the mo-
tor head (3):
Closure upward in
position
Remove the cover.
2. Take the filter insert (28) out of
the cover (27).
3. Wash the filter insert (28) with
lukewarm water and soap and
leave it to dry.
4. Place the filter insert (28) in the
cover (27) and reclose it:
Closure downward
in position

Storage

1. To store the mains cable on the back
of the device, pull out the top cable
holder (29a) and turn the bottom cable
holder (29b) outwards.
Wind the mains cable (2) around the
cable holders (29a+b) on the back of
the device.
2. Wind the vacuum hose (18) around
the motor head (3). The two retaining
brackets (25) hold the vacuum hose in
place.
3. Place the telescopic suction tube into the
accessory holder on the unit's feet (6a).
4. The bag provided is designed for stor-
ing the small accessories (14).
5. Store the appliance in a dry place and
out of reach of children.
12
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
OPEN
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
CLOSE
Machines must not be disposed of
with household refuse.