Herunterladen Inhalt Inhalt Diese Seite drucken

For Use With A Weber Coupling And Straight Drawbar; Nutzung Mit Weber-Kupplung Für Gerade Deichseln - HASE Bikes LEPUS COMFORT Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

LEPUS
6. Setzen Sie die Monoporter auf die Kupplung.
Hinweis:
Beachten Sie die Betriebsanleitung des Herstellers des
Monoporters.
Nutzung mit Weber-Kupplung für gerade Deichseln
1. Richten Sie die Kupplung waagerecht aus und schrauben
Sie sie mit 30 Nm an das Anschlusstück des Lepus fest.
Achtung!
Die Wippe muss fest angeschraubt sein.
2. Schrauben Sie von der handelsüblichen Weberkupplung
E oder EL (nicht im Lieferumfang der Universalkupplung
enthalten) die Verbindungsplatte ab.
3. Setzen Sie die Weberkupplung (1) in die mittlere Bohrung
der Universalkupplung und schrauben Sie sie auf die gle-
iche Weise wie sie an der Verbindungsplatte angebracht
war fest. Achten Sie darauf, dass sich die Erhebungen auf
der Kunststoffscheibe in der Nut der Weberkupplung
befinden.
Achtung!
Diese Kupplung eignet sich nur für Anhänger mit geraden
Deichseln. Bei Anhängern mit gebogenen Deichseln ist
das Fahren in Linkskurven stark eingeschränkt, da die
gebogenen Deichseln an das linke Hinterrad des Lepus
stößt. Unfallgefahr!
Lepus 5/13 QuickStickNabe D-ENG
6. Slide the Monoporter onto the coupling.

For use with a Weber coupling and straight drawbar

1. Position the hitch so that it is level and screw it to the
2. Remove the connecting plate of a commercially available
3. Insert the Weber coupling (1) into the middle hole of
1
Zubehör montieren
Installing accessories
Note:
Please note the information provided in the user's manual
for the Monoporter.
adapter plate of the Lepus with a torque of 30 Nm (22
ft-lbs).
Caution!
The hitch must be screwed on tightly.
Weber coupling type E or EL (not included in the univer-
sal coupling assembly).
the universal coupling and attach it in the same way it
was attached to the connecting plate. Make sure that the
projections on the plastic washer are positioned in the
groove of the Weber coupling.
Caution!
This coupling is only appropriate for trailers with straight
drawbars. When pulling a trailer with a curved drawbar,
the turning circle for left turns is severely limited because
the curved drawbar bumps against the left rear wheel of
the Lepus. Danger of accident!
31

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Lepus custom

Inhaltsverzeichnis