Original Spare Parts And Accessories; Metrological Inspection; Explanation Of Symbols - Visomat Handy Express Gebrauchsanweisung

E
Cuff: Cuff type H7, wrist circumference 12.5 cm - 21.5
cm
Operating conditions: Ambient temperature 10°C to 40°C, relative
humidity 15% to 85% non-condensing, air pres-
sure 700 to 1060 hPa
Conditions for storage Ambient temperature -20°C to +60°C
and transport: Relative humidity 15% to 95%, non-condensing
Inflation and defla- Regulated automatically
tion:
IP rating: IP 20: Protected against solid foreign bodies
with a diameter from 12.5 mm, no protection
against water.
Protection against Internal power supply, applied part type BF
electric shock: (cuff)
Operating mode: Continuous operation
Classification: Internal power supply using batteries.

4. Original spare parts and accessories

The following original spare parts or accessories are available
through specialist retailers:
• Cuff type H7 (for wrist circumference 12.5-21.5 cm)
Part no. 2105601, PZN-13975619
Subject to technical modifications.

5. Metrological inspection

Generally, it is recommended that a metrological inspection is
performed every two years. However, professional users in Ger-
many are obligated to do so in accordance with the "Medical
Products Operator Ordinance" (Medizinprodukte-Betreiberver-
ordnung). This can be performed either by UEBE Medical GmbH,
an authority responsible for metrology or an authorised mainte-
nance service. Please refer to your national regulations.
EN-58
Technical information Technical information
Upon request, responsible authorities or authorised mainte-
nance services receive a "Test instruction for metrological inspec-
tion" from the manufacturer.
Please only submit the device for metrological inspection togeth-
er with the cuff and the instructions for use.
Important: No modifications, e.g. opening the device (except to
replace the batteries), may be made to this device without the
manufacturer's permission.

6. Explanation of symbols

This product complies with Council Directive 93/42/
EEC of 5 September 2007 concerning medical devices
0123
and bears the mark CE 0123 (TÜV SÜD Product Service
GmbH).
Degree of protection against electric shock TYPE BF
Consult the instructions for use
Keep dry
Device serial number
Reference number = item number
IP20
Protected against solid foreign bodies with a diameter
from 12.5 mm, no protection against water.
Manufacturer
E
EN-59