Matching The Video Monitor Color To The Printer Color - Sony UP-2800P Gebrauchsanweisung

Setting Up the Printer (continued)

Matching the Video Monitor Color to the Printer Color

To match the color of the monitor image to that of the printout, adjust the monitor
and printer colors such that the monitor color is the same as that of the printout.
The printer outputs either of two kinds of video signals according to the printer
settings.
• EE (E to E): Signals are output to the monitor after being processed by the
printer's circuitry.
• THRU (THROUGH): Signals are output to the monitor as is.
Before adjusting the printout color
The monitor color may not be adjusted correctly even if the printer color is
correctly adjusted. Check the color of the video monitor before adjusting the
printout color. In such a case, use the THRU signal.
After adjusting the color of the video monitor using video monitor controls, adjust
the color of the printer's output signal.
Note
This adjustment is performed to adjust the color of the printer output signal when
the monitor color is unsatisfactory. This adjustment does not affect the printout
itself. To adjust the color of the printout, see "Adjusting the Printout Color and
Sharpness" on page 75).
4, 8 2, 3, 7
1, 6
72
Installation and Adjustment