Sony UP-2800P Gebrauchsanweisung Seite 54

Making Printouts With a Caption (continued)
54
Operation
To enter a space
1 Position the green cursor to the point where you want to enter a space by
performing the operations explained in step 5.
2 Select SP by pressing the ◊, √, ı or ∫ button.
3 Press the EXEC button.
A single space is entered and the green cursor moves to the next position.
If there is a character at the position where the space is entered, that character is
deleted and a single space is left.
To replace a previously entered character without changing the
number of characters
You can replace a previously entered character with a new one.
1 Position the green cursor to the character to be replaced by performing the
operations explained in step 5.
2 Overwrite the invalid character with the correct character by performing the
operations explained in steps 6 and 7.
The previously entered character is replaced with the new one.
To add characters midway
1 Position the cursor to the position where a character is to be added by
performing the operations explained in step 5.
Example: To Add a character between A and B
1 Move the cursor to B
(B is highlighted green).
C A P T I ON ON
A B C
A B CDE F GH I J K L MN
O PQR S T U VWX Y Z
01 23456789 + – = %
2 Switch INS to green
2 Select INS by pressing the ◊, √, ı or ∫ button.
3 Press the EXEC button.
A single space is inserted between A and B and the green cursor is
positioned at the space.
Cursor (lit green)
C A P T I ON ON
A B C
A B CDE F GH I J K L MN
O PQR S T U VWX Y Z
01 23456789 + – = %
Note
A dark change of the monitor screen may occur after the EXEC button is
pressed.
4 Enter the character to be added.
1 B blinks when the
cursor comes to B. 2 Display INS.
C. ON I NS
A B C
Cursor (blinking)
C. ON I NS
A B C
0 2
0 2