Sony UP-2800P Gebrauchsanweisung Seite 76

Setting Up the Printer (continued)
76
Installation and Adjustment
2
Select LOAD COLOR by pressing the ◊ or √ button.
CO L OR A D J U S T CO L OR : n n n
/ COL / LA Y / PRN / I N / OUT /
L OA D CO L OR 1 / 2 / 3
CYN–RED 0
MA G – GR N 0
Y E L – B L U 0
D A R K 0
L I GH T 0
S H A R P N E S S 3 1~5
S A V E CO L OR 1 / 2 / 3 E X EC
Q 1 A ST I CK16
Position the cursor to LOAD COLOR
by pressing the ◊ or √ button.
3
Select the LOAD COLOR number of the values to be adjusted or to be
modified by pressing the ı or ∫ button.
CO L OR A D J U S T CO L OR : n n n
/ COL / LA Y / PRN / I N / OUT /
L OA D CO L OR 1 / 2 / 3
CYN–RED 0
MA G – GR N 0
Y E L – B L U 0
D A R K 1
L I GH T 0
S H A R P N E S S 3 1~5
S A V E CO L OR 1 / 2 / 3 E X EC
Q 1 A ST I CK16
Switch the desired LOAD COLOR
number to green by pressing the ı or
∫ button.
When modifying, you can preserve the original settings. (See "To retain the
originally set value" on page 79.)
4
Adjust the printout color.
1 Select the item to be adjusted by pressing the ◊ or √ button.
2 Perform the adjustment by pressing the ı or ∫ button.
The RED, GREEN and BLUE color component and contrast settings are
divided into 15 steps, from –7 to +7, indicated by a value and graph. The
center of the graph corresponds to the standard color.
You can set the sharpness to any of 5 steps from 1 to +5. On a setting of step 3
corresponds to the standard sharpness.
L OAD CO L OR :
1 / _ / _
Display LOAD COLOR by pressing
S
the ◊ or √ button
L OAD CO L OR :
_ / 2 / _
Display the desired LOAD COLOR number
S
by pressing the ı or ∫ button.