Before Printing; Loading An Ink Ribbon Cartridge - Sony UP-2800P Gebrauchsanweisung

Operation

Before Printing

This section describes the following operations that must be made prior to starting
printing after mounting the paper tray and paper cover on the printer and making
the necessary connections.
• Loading an ink ribbon cartridge (see below)
• Loading paper (see page 12)
• Selecting the input signal (see page 14)
Once the above operations have been completed, there should be no need to repeat
them during routine printing. Perform them only when absolutely necessary.

Loading an Ink Ribbon Cartridge

To make printouts, an ink ribbon cartridge and paper (which are compaticble) must
be loaded. (see "Ink Ribbon Cartridge and Paper" page 99)
If the printer detects an incompatible combination, an error message appears.
Use the ink ribbon cartridge and print paper (supplied) to check if the video printer
functions properly.
Notes
• Use only ink ribbon cartridge and paper that are designed for use with this
• When replacing the ink ribbon cartridge, do not turn off the power. Turning off
1
2
printer. Failing to do so is likely to result in unsatisfactory printing or
malfunctions.
the power will cause the image stored in the memory to be lost.
Open the front panel by pulling the front panel top toward you.
Remove the ink ribbon cartridge by pushing the ink ribbon cartridge itself.
The ink ribbon cartridge pops out.
When you use the printer first, this operation is not required.
Continue to next page m
Operation
9