To Change Playback Speed (Speed Control); Storing The Settings For Individual Discs (Personal Disc Memory) - Sony WALKMAN MZ-R900PC Bedienungsanleitung

To change playback
speed (Speed Control)
The playback speed can be adjusted in 7
steps (80%, 85%, ...100%, 105%, 110%).
1
Press DISPLAY for 2 seconds or
more during playback.
2
Turn the control towards . or
N> until "SPEED" flashes in the
display, and then press x.
The recorder changes to speed-setting
mode.
3
Turn the control towards . or
N> to select the playback speed.
"+" shows the normal speed and the
cursor shows the playback speed you
are selecting.
Example: while the playback speed is
95% of normal.
– and the cursor appear
alternately in the display.
80% 100%
38
-GB
DISPLAY
Control
x
110%
4
Press x to set the playback speed.
"S" appears to the right of the elapsed
time during playback speeds other than
normal.
z
The settings can be stored to the Personal Disc
Memory (page 38).
Notes
• You cannot change playback speed with the
recorder.
• The playback sound will be affected by the
playback speed.
• All settings will be lost when you remove the
disc from the recorder.
Storing the settings for
individual discs
(Personal Disc Memory)
The recorder can store the various settings
for each disc, and then retrieve them
automatically whenever the disc is
inserted.
The following setting can be stored:
• Volume
• Playback mode
• Playback order (Program play)
• Sound quality (Digital Sound Preset)
• Playback speed (Speed control)