On The Remote Control - Sony WALKMAN MZ-R900PC Bedienungsanleitung

Display window on the recorder
A
A
Track number
1)
Track number
Numbers of tracks
after the current
2)
track
3)
Current date
1)
If the track is labeled, "
display followed by the track name (appears
only when "RecRemain" is selected while
stopped).
2) If the disc is labeled,
display followed by the disc name (appears
only when "AllRemain" is selected while
stopped).
3)
Appears only when the clock is set (appears
only when "Clock" is selected).
z
The display that appears on the remote control
is different from the ones on the recorder. See
"On the remote control" (page 29) to check the
display that appears on the remote control.
To know the recording
condition
The indicator lights up or flashes
according to the recording condition.
Recording
condition
While recording
Recording standby flashes
B
B
Elapsed time
Remaining time for
recording
Remaining time
after the current
location
3)
Current time
" appears in the
"
" appears in the
REC indicator
lights up
flashes according
to the loudness of
the source while
recording with a
microphone (voice
mirror)
Recording
condition
Less than 3
minutes'
recording time
available
A track mark has
been added (when
controlling by the
recorder only)
z
If you want to check the playing position or
track name while playing, see page 40.

On the remote control

DISPLAY
1
Press DISPLAY while recording or in
stop mode.
Each time you press the button, the
display changes as follows.
Display window on the remote control
C D
Indication C/D
While recording
Track number/Elapsed time
r
Track number/Remaining time for
recording
r
1)
—/Current time
1)
Appears only when the clock is set.
REC indicator
flashes slowly
goes off
momentarily
continued
29
-GB