Quick Reference Guide - struers RotoPol 35 Gebrauchsanweisung

Mounting a Disc
Starting the Disc
Stopping the Disc
Grinding/Polishing
Settings
Setting to User Select
Setting to GRINDING
Setting to POLISHING
RotoPol-31/-35
Instruction Manual

Quick Reference Guide

Place the disc on the turntable and turn it until the three driving
pins engage with the holes in the turntable.
s
Press START . The disc starts rotating. Selected functions are
executed and connected RotoSystem modules start operating.
o
Press STOP . The disc stops rotating. Selected functions and
connected RotoSystem modules stop.
Mount the required surface on a disc.
Mount the disc on the turntable.
Select the desired functions, if RotoCom is not connected.
s
Press START
WATER OFF 150 RPM
D U
AN AO
D U
WATER ON 300RPM
GRINDING
D U
AN AO
D U
WATER OFF 150RPM
POLISHING
.
The User Select screen has an empty
line at the bottom.
w W
- Press or
WATER OFF.
- Press SPEED
the speed. (RotoPol-31)
- Press SPEED
speed. (RotoPol-35)
AN
Press DISC
between the settings.
The standard setting GRINDING is pre-
set to WATER ON and 300RPM.
AN
Press DISC
between the settings.
The standard setting POLISHING is
pre-set to WATER OFF and 150RPM.
to select WATER ON or
d d
150 or 300 to select
dN dO
or to adjust the
AO
or to change
AO
or to change
31