INSIDE
Function description
Alternative trigger:
DIP switch 5
Serves to check the function and to clear out introduced water.
'ON' position:
Alternative trigger function enabled (default setting).
'OFF' position:
Alternative trigger function disabled.
1. Introduction of water
If liquid is introduced and
drains through the sensor si-
phon during the duration set
at time control flushing time
(see page 23), a flushing
cycle is triggered.
Clog protection:
DIP Switch 5
If the sensor siphon recognizes a drain blockage, the actual flushing
will be aborted and following flushings will be prevented.
Stellung „ON":
Clog protection enabled.
Stellung „OFF":
Clog protection disabled (default setting).
2. Flushing
The introduced liquid is
flushed away (flushing
time as set at time control
flushing time, see page 23).
Urinal control WimTec INSIDE
EN
ON
OFF
1
2 3 4 5 6
ON
OFF
1
2 3 4 5 6
29