INSIDE
Assembly
1
4
1.
Execute pre-flush with flush piece and tube.
2.
Close shut-off valve. Insert dirt filter. Shut down water and power supply.
ATTENTION! Do not restore water supply until mounting of control and
ceramics are completely finished.
3.
Insert magnetic valve and fictions according to illustration.
ATTENTION! Mind flow direction of the magnetic valve.
4.
Open shut-off valve (keep water supply shut down).
5.
Adjust sensor siphon length to outlet.
2
5
3
Following steps must
be done in order as
described necessarily!
Urinal control WimTec INSIDE
EN
!
ATTENTION!
25