Function Description; Automatic Flushing; Dry-Out Protection - WimTec INSIDE Montage- Und Bedienungsanleitung

EN
INSIDE

Function description

Automatic flushing:

DIP switch 3 = ON
If the device is not used for the duration set at the interval control
(3 - 48 h, preset to 24 h), an automatic rinse is triggered to remove
stagnant water.
'ON' position: Automatic flushing enabled, dry-out protection disabled (default setting).
'OFF' position: Automatic flushing disabled, dry-out protection enabled.

Dry-out protection:

DIP switch 3 = OFF
Serves to restore the odour trap if the siphon has become dry.
'ON' position: Automatic flushing enabled, dry-out protection disabled (default setting).
'OFF' position: Automatic flushing disabled, dry-out protection enabled.
1. Dried out
The sensor siphon detects
a dried-out siphon.
28 Urinal control WimTec INSIDE
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
2. Normal state
A brief rinse restores
the odour trap.