General Notes - Wimtec Inside Montage- Und Bedienungsanleitung

EN
INSIDE

General notes

Congratulations on purchasing
your urinal control WimTec INSIDE.
This manual is suitable for
the following products:
WimTec INSIDE - 230 V
Delivery scope:
Siphon with integrated sensor, magnetic valve
and control electronics incl. an integrated
safety transformer.
!
Important installation notes:
For urinals with a level urinal outlet at the back.
Urinals with a vertical siphon e.g. Laufen Taro
Nova only with siphon adaptor.
To avoid rinsing out of cleaning agents inside the
ceramic a central water shut-of resp. power off
for the urinals should be provided on site.
Mounting and installation may only be
performed by a qualified service provider in
accordance with DIN 1988, ÖVE/ÖNORM E
8001 and VDE 0100 Part 701.
Power supply to be established by a 2-pin
main switchwith minimum 3 mm connection
opening and protect with maximum 6 A!
When planning and installing sanitary facilities,
all relevant local, national and inter-national
standards and provisions must be observed!
18 Urinal control WimTec INSIDE
Art.No. 102 536
!
The "General installation
terms and conditions"
provided at
www.wimtec.com apply.