R) Pre-Listening; S) Microphone Operation; Switching Off; Anti-Shock Memory - Renkforce CDM-900MUSB Bedienungsanleitung

r) Pre-listening

Turn the control CUE LEVEL (34) to the "MIN" position before plugging in, unplugging or putting on the
headphones or before switching the device on or off. There is a danger of damage to your hearing from
excessive volume at the headphones output.
• Use the switch CUE (28) to select the channel for pre-listening.
• The volume level of the headphones is set with the CUE LEVEL (34) controller.

s) Microphone operation

• Speak into the microphone.
• The volume level of the microphone input is set with the DJ MIC (35) controller.
t) Switching off
• Interrupt playback by pushing the PLAY/PAUSE button (13).
• Switch off the amplifier and any connected audio sources.
• Only then switch off the DJ station using the POWER switch (1).

11. Anti-shock memory

The device is equipped with a digital anti-shock memory. This reduces the risk of interruptions during CD
playback when the device is subjected to vibrations.
The anti-shock memory is loaded automatically when the audio data are read. The device needs a few
seconds until the memory is full and it can work optimally.
The saved data quantity corresponds to approx. 20 seconds of music playback. The anti-shock memory
continues to play the music in case of blows that would otherwise cause an interruption.
51