O) Effects; P) Single/Continue Playback; Time Function - Renkforce CDM-900MUSB Bedienungsanleitung

o) Effects

The device is equipped with a SCRATCH, a BRAKE and a REVERSE effect.
Scratch effect
• Press the VINYL button (19) to switch on the effect. The button lights up.
• Turn the JOG wheel (2) to scratch like on a record player.
• Press the VINYL button (19) again to switch off the effect.
Brake effect
• Press the BRAKE button (5) to switch on the effect. The button lights up.
• When playback is started or stopped, this will not be sudden but with a delay. This effect simulates start-
up or stop of a record.
• Press the BRAKE button (5) again to switch off the function.
Reverse Effect
• Press the REVERSE button (20) to reverse playback direction. The tracks are now played backwards. The
button lights up.
• Press the REVERSE button (20) again to switch off the function.

p) SINGLE/CONTINUE playback

Use the SINGLE/CONTINUE button (3) to switch the player between individual SINGLE-track playback and
continuous (CONTINUE) track playback.
SINGLE: The device will switch to pause mode after every track it plays.
CONTINUE: The device will play back all tracks and then switch to pause.
q) TIME function
Use the TIME (4) button to switch between the different play time display options (elapsed track time > total
remaining time > remaining track time) on the display.
• Keep pressing the TIME button (4) until the desired time display appears.
The total remaining time is only displayed for audio CDs. With MP3 files, the total playing time is not dis-
played.
50