J) Track/Folder Selection; K) Search - Renkforce CDM-900MUSB Bedienungsanleitung

j) Track/Folder selection

Use the SEARCH/SKIP (9/10) buttons and the FOLDER/TRACK (11) button to select individual tracks.
• Push the button FOLDER/TRACK (11). The button lights up. You are now in the folder selection function.
Now choose the desired playback folder with the SEARCH/SKIP (9/10) buttons (MP3 playback).
• Push the button FOLDER/TRACK (11) again. The button is no longer lit. You are now in the track selection
function. Now choose the desired track for playback with the SEARCH/SKIP (9/10) buttons.
Whenever a track is selected, the device automatically sets the CUE mark at the beginning of that track.

k) Search

The SEARCH/SKIP buttons (9/10) can be used to start a quick search.
• Push and hold the buttons SEARCH/SKIP (9/10) to search backwards or forwards.
Searching with the SEARCH/SKIP (9/10) is possible in the play and pause modes.
During the search, playback is muted. Use the time shown in the display for searching.
The JOG wheel (2) serves to locate a certain point in a track exactly. In pause mode, it is very easy to set
the start of the beat precisely with the rotary wheel, since the track is scanned in very small steps (frame)
and the search steps can be heard when turning the JOG wheel (2).
• Turn the jog wheel (2) counter-clockwise in pause mode to search backwards or clockwise to search
forwards.
• In playback mode, the playback speed is altered with the JOG wheel (2). The playback speed change
depends on the rotating speed of the wheel.
47