C) Inserting Usb Memory; D) Inserting Sd Card - Renkforce CDM-900MUSB Bedienungsanleitung

c) Insert USB memory
• Plug the USB memory into the USB socket (24).
• If the playback source USB has been selected, the device will read the memory content of the USB
memory.
• Then, the device automatically sets the CUE mark at the beginning of music in the first track and goes into
pause mode.
Switch off the CD player or switch to CD/SD playback to remove or replace the USB storage. Never remove
the USB storage during playback. This may destroy the storage or the data.
Do not connect any MP3-player to this connection if it is battery-operated.
The USB interface power supply may load the inserted batteries and cause overheating or ex-
plosion of a battery.
If the storage medium is not recognised, remove it and insert it again.
Due to the great variety of systems with USB interfaces and their different functions, some of
which are very producer-specific, we cannot guarantee that all media will be recognized and
that all the operational functions are available on this device.
d) Insert SD card
• Insert the SD card into the SD connection (25) with the right side until it locks audibly. The metal contact
surfaces of the SD memory card must point towards the rear of the device when inserting.
• If the playback source SD has been selected, the device will read the memory content of the SD card.
• Then, the device automatically sets the CUE mark at the beginning of music in the first track and goes into
pause mode.
Switch off the CD player or switch to CD/USB playback to remove or replace the SD card. Never remove
the SD card during playback. This may destroy the SD card or the data. If you want to remove the SD
card, press onto the SD card slightly until you can hear an audible locking sound. The SD card can now
be removed.
If the storage medium is not recognised, remove it and insert it again.
Due to the great variety of SD storage media and their different functions, some of which are
very producer-specific, we cannot guarantee that all media will be recognized and that all the
operational functions are available on this device.
45