K) Selecting Sound Of Nature; L) Setting Display-Volume; M) Activating Time Projection; N) Switching Led Lamp On - Conrad 67 21 58 Bedienungsanleitung

k) Selecting sound of nature

The standard setting for the sound of nature is 'Babbling Brook'.
• Press the ' SELECT' Button to select the sounds of nature 'Babbling Brock', 'Night Bug',
'Rain', 'Storm', 'Wind' and 'White Noise'.
• Use the 'VOLUME' control to set the volume.
The recently set sound of nature is also used for the alarm, if the setting
'SOUND' has been selected.

l) Setting Display-Volume

Slide the 'BACKLIGHT' switch to 'HI', 'LO' or 'OFF'.

m) Activating time projection

Using the 'PROJECTION' slide switch, the projection of the Display-Time is activated.
Slide the 'PROJECTION' switch towards 'ON' to activate the projection or towards 'OFF' to
deactivate the projection.
Never look at the projector with naked eyes.

n) Switching LED lamp on

The brightness of the LED-Lamp can be selected in four levels. The standard setting for the
brightness is 'HIGH'.
• Press the 'SNOOZE/DRIMMER' button to switch on the lamp in normal operation.
• By multiple pressing of the 'SNOOZE/DIMMER' button, the brightness is set in the sequence
'HIGH', 'MEDIUM', 'LOW', 'DIM' and 'OFF'.
Pressing the 'SNOOZE/DIMMER' button deactivates the snooze function.

o) Indicator for low battery voltage

The symbol appears in the display if the battery voltage decreases.
Change the batteries according to the instructions.
26