Leister TRIAC AT Bedienungsanleitung Seite 21

TRIAC_AT_Layout 1 28.02.12 10:45 Seite 21
Please read operating instructions carefully before useand
keep for future referen
r ab
den
von
Warning
DANGER! Danger when opening up the tool, as live components and connecti-
ung
ons are exposed. Therefore, before opening it, unplug the tool to ensure discon-
nection from the mains.
dert
Incorrect use of the hand extruder (eg overheating of the material) can pre-
sent a fire and explosion hazard, especially near combus t ible materials
and explosive gases.
Do not touch the element housing, air nozzle and discharging plastizi-
sed material when they are hot as they can cause burns. Let the tool
cool down. Do not point the hot air flow and the discharg ing plastizised
ng
material in the direction of people or animals.
Caution
120
The voltage rating stated on the tool must correspond to the mains voltage.
230
For personal protection on building sites we strongly recommend the tool
FI
be connected to a RCCB (Residual Current Circuit Breaker) .
The tool must be operated under supervision. Heat can ignite flamma-
ble materials which are not in view.The machine may only be used by qua-
lified specialists or under their supervision. Children are not authorized
to use this machine.
hten
Protect tool from damp and wet.
tro-
/96
echt Repairs should only be carried out by authorized Leister service points.
melt Restricted to use with original Leister accessories and replacement parts.
Translation of the Original User Manual Translation of the Original User Manual
Warranty
• For this tool, we generally provide a warranty of one (1) year from the date of
purchase (verified by invoice or delivery document). Damage that has occurred
will be corrected by replacement or repair. Heating elements are excluded from
this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the guarantee.
• Guarantee claims will be rejected for tools that have been altered or changed by
the purchaser.
Conformity
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confirms that this product, in the version as brought into circulation through
us, fulfils the requirements of the following EC directives.
Directives
:
Harmonized Standards
Kaegiswil, 16.11.2011
Bruno von Wyl, CTO
Disposal
Power tools, accessories and packaging should be sorted for environmental-
friendly recycling. Only for EC countries: Do not dispose of power tools
into household waste! According to the European Directive 2002/96/EC on
waste electrical and electronic equipment and its incorporation into national
law, power tools that are no longer suitable for use must be separately col-
lected and sent for recovery in an environmental-friendly manner.
2006/42, 2004/108, 2006/95
: EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2, EN 50366, EN 62233,
EN 61000-3-2, EN 61000-3-3, EN 60335-2-45
Beat Mettler, COO
Deutsch Deutsch
English English
21