B) Manual Search For The Dcf Signal - Conrad WB92 Bedienungsanleitung

• Push the „MODE/SET" button (B2) briefly until the weekday display language flashes in the
lower right of the display.
Set the desired language with the button „+" (B4) or „-" (B5).
„GE" = German
„FR" = French
„ES" = Spanish
„IT" = Italian
„NE" = Dutch
„DA" = Danish
„RU" = Russian
„EN" = English
• Push the button „MODE/SET" (B2) briefly again to save all settings and leave the setting
mode (alternatively, wait for a few seconds without pushing a button).

b) Manual Search for the DCF Signal

Then keep the buttons „+ / ALARM ON/OFF" (B4) and „- / °C/°F" (B5) pushed at the same time
for the duration of 3 seconds to restart the DCF reception attempt. The reception symbol (A10)
in the lower right of the display flashes.
The reception attempt takes about 5 minutes; do not move the weather station during this time
and do not push any button.
If there is still no current display for the time and date after this time, select a different site of
setup for the weather station and perform another reception attempt.

Do not put the weather station next to electronic devices, metal parts, cables, etc.
Bad reception can also be expected, e.g. in case of metallised insulation glass
windows, reinforced concrete construction, coated special wallpaper or basement
rooms.
46