Description Of Individual Parts; Display Details - VOLTCRAFT VC-10 Bedienungsanleitung

Description of Individual Parts

(see fold-out page)
1 Rotary switch for setting the measuring functions
2 RANGE button for manual measuring range selection
3 MODE button for switching the measuring functions
4 Display (LCD) with function and measuring unit display
A Battery change display
B Prefix with negative measuring values
C Indicator for direct (DC) or alternate current (AC)
D Analog bar display for the measuring value
E Indicator for active automatic time cutoff
F Indicator for automatic range selection (Auto-Range)
G Indicator for activated HOLD function
H Symbols for acoustic continuity check and diode test
I Digital measuring value display (4000 digits)
J Display of the measuring unit
5 NCV display (no-contact voltage detector)
6 Low-imp. button for reducing the measuring impedance
7 HOLD button for manual measuring range selection
8 Grip section marking on the measuring tips
9 Measuring contacts
10 Foldable casing cover and installation bracket
11 Battery compartment cover with wrap device for the measuring
leads

Display details

AC alternating size for voltage and current
DC direct size for voltage and current
V volt (unit of electric potential)
mV milli Volt (exp.-3)
32
Plage de tension alternative, protection contre la surcharge 600 V
Gamme (50-400 Hz) Précision
400 mV ±(1,5% + 30 ch)
4 V
40 V ±(1,2% + 3 ch)
400 V
600 V ±(1,5% +5 ch)
Plage de courant continu, protection contre la surcharge
200 mA/500V
Gamme Précision
400 µA
±(1,5% + 2 ch)
4 mA
40 mA
±(1,5% + 2 ch)
200 mA
Plage de courant alternatif, protection contre la surcharge
200mA/500V
Gamme (50-400 Hz) Précision
400 µA
±(1,8% + 3 ch)
4 mA
40 mA
±(2% + 3 ch)
200 mA
Plage de résistance
Gamme Précision
400 Ω
±(0,8% + 3 ch)
4 KΩ
40 Ω
±(1,2% + 3 ch)
400 KΩ
4 Ω
±(2% + 3 ch)
40 MΩ ±(3% + 3 ch)
Résolution
0,1 mV
1 mV
10 mV
100 mV
1 V
Résolution
0,1 µA
1 µA
10 µA
100 µA
Résolution
0,1 µA
1 µA
10 µA
100 µA
Résolution
0,1 Ω
1 Ω
10 Ω
100 Ω
1 Ω
10 KΩ
77