Mixing Bowl With Food Processor; Blender - Silvercrest SKM 500 B1 Bedienungsanleitung

Mixing bowl with food processor

NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Fit the drive shaft i to the shaft holder.
2) Place the mixing bowl u onto the motor block o so that the arrow
pointing at the symbol
is pointing at the symbol
3) Select a suitable disk 0 q w (see chapter "Working with the food proces-
sor") and insert it into the disk adapter e:
–
–
4) Place the disk adapter e with the disk fi tted onto the drive shaft i.
5) Put the lid 3 onto the mixing bowl u so that the arrow
points to the symbol
audible "click" is heard and the arrow is pointing to the symbol
6) Slide the pusher 1 into the fi lling shaft 2.
7) Insert the plug into the mains power socket.

Blender

NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Place the blender onto the motor block o in a central position so that the
arrow
2) Turn the blender until the arrow
SKM 500 B1
and rotate the mixing bowl u until the arrow
if a diff erent disk is still installed: Press the metal tab of the disk outwards
so that it slides over the locking mechanism on the disk adapter e. You
can now remove the disk.
Insert the new disk with the narrower side fi rst into the recess in the disk
adapter e and push the disk fi rmly downwards so that it engages and
is fi rmly seated.
on the holder with mixing knife 9 is pointing at the symbol
. The mixing bowl u is now fi xed.
on the mixing bowl u. Then rotate it until an
is pointing at the symbol
is
on the lid 3
.
.
.
69
GB