Mixing Bowl With Food Processor - Silvercrest SKM 500 B2 Bedienungsanleitung

Mixing bowl with food processor

NOTE
► Use the diagrams on the fold-out page for assembly assistance!
1) Fit the drive shaft
2) Place the mixing bowl
pointing at the symbol
is pointing at the symbol
3) Select a suitable disk
and insert it into the disk adapter
–
if a different disk is still installed: Press the metal tab of the disk outwards
so that it slides over the locking mechanism on the disk adapter
can now remove the disk.
–
insert the new disk with the narrower side first into the recess in the
disk adapter
engages and is firmly seated (Fig. 2).
Fig. 1
4) Place the disk adapter
5) Put the lid
points to the symbol
audible "click" is heard and the arrow is pointing to the symbol
■ 10 │ GB │ IE │ NI
to the shaft holder.
onto the motor block
and rotate the mixing bowl
. The mixing bowl
(see chapter "Working with the food processor")
(Fig. 1) and push the disk firmly downwards so that it
Fig. 2
with the disk fitted onto the drive shaft
onto the mixing bowl
on the mixing bowl
so that the arrow
until the arrow
is now fixed.
:
so that the arrow
. Then rotate it until an
is
. You
.
on the lid
.
SKM 500 B2