Working With The Food Processor - Silvercrest SKM 500 B1 Bedienungsanleitung

Working with the food processor

GB
INGREDIENT
Apples/carrots
Parmesan
Cucumber
Potatoes
Onions
Chocolate
Hard cheese
(e.g. mature
Gouda)
74
You can shred, grate or cut using the three disks 0 q w of the food processor.
1) Select the required disk and assemble everything as described in the chapter
"Assembly".
2) Remove the pusher 1 from the fi lling shaft 2.
3) Cut the food into pieces that will easily fi t into the fi lling shaft 2.
4) Start the food processor at setting 1 by turning the speed regulator p.
5) Then gradually add the food. Push the food in using the pusher 1 without
applying pressure.
Do not exceed the quantities specifi ed in the following table.
SHREDDING DISK
max. 500 g
max. 200 g
-
max. 500 g
-
-
max. 300 g
NOTE
► Do not prepare large quantities all at once, but in several portions. Empty
the mixing bowl u each time.
► Do not allow the appliance to operate for long periods when chopping
(hard) cheese or chocolate. Otherwise the ingredients will become too hot,
start to melt and agglutinate.
CUTTING DISK
max. 500 g
-
max. 2
max. 500 g
max. 300 g
-
-
GRATING DISK
-
max. 200 g
-
max. 500 g
-
max. 200 g
-
SKM 500 B1