Error Codes - Bender ISOMETER isoUG425 Kurzanleitung

5. Error codes

If a device error occurs, the following error codes are displayed:
Error
Meaning
code
The connection between terminals E or KE and earth is interrupted
E.01
The polarity of the DC system to be monitored is false.
E.02
Measurement error/invalid calibration for the current software
E.05
version
A calibration error was detected during the device test
E.08
Device error - Contact Bender Service
E.xx
24
isoUG425_D00220_02_Q_DEEN / 05.2018