Towing Hitch - Kärcher MIC 34C Betriebsanleitung

8.11 Towing hitch

1
1 Safety pin
2 Towing hitch
 Unlock the safety bolt by turning it and pull it out toward
the side.
 Slide the lorry hitch into the square pipes of the ma-
chine frame.
 Slide in the safety bolt and lock it by turning it.
 The permissible drawbar and drawing loads of the ma-
chine are indicated in the Chapter "Technical Specifica-
tions".
8.12 Coupling triangle
The coupling triangle enables the attachment of upgrade
kits already available at the municipalities.
1 Implement frame
2 Safety pin
3 Coupling triangle
8.12.1 Securing the coupling triangle
 Attach the coupling triangle to the front power lift and
secure it by means of safety bolts.
8.12.2 Prerequisites for operation
– Depending on the weight of the mounted attachment,
counterbalance weights (option) must be attached to
the back of the appliance.
– Establish hydraulic connections depending on the at-
tachment.
Refer to the operating instructions of the attachment.
52
8.12.3 Operations
 To raise and lower, operate the front power lifter with
the joystick.
8.13 Weed broom
1
2
1 Weed broom
2 Water-spraying equipment
3 Splash guard
4 Hydraulic couplings main PTO
8.13.1 Proper use
The upgrade kit weed broom is attached to the front appli-
ance carrier.
It is used to remove:
– encrusted dirt
– Growth between paver stones
– and similar cleaning tasks.
 The upgrade kit can be used in conjunction with the 2-
broom system.
 The weed broom is suitable for all surfaces.
 Street surfaces or similar surfaces can become
scratched, even if the weed broom is used in floating
position.
8.13.2 Important notes
 When driving on public roads, you must adher to the lo-
cal regulations.
 Adhere to the local accident prevention guidelines and
safety notes.
 Follow the safety and operating instructions in the tow-
ing vehicle manual.
8.13.3 Prerequisites for operation
 Front power lift must be attached to the vehicle.
8.13.4 Installing the weed broom
 Attach the completely pre-assembled weed broom to
the front power lift, and secure it.
Note
If the weed broom is supplied as an attachment kit, then
assemble it beforehand in accordance with Installation
instructions 0.083-359.0 enclosed with the attachment
kit.
 Establish hydraulic connections PTO, AUX 1 and AUX
2 on the vehicle.
 Create a water connection.
18
-
EN