Bentrup TC 2010 Bedienungsanleitung Seite 41

40
EU declaration of conformity
We hereby declare, that the listed products comply with the requirements of the EU
Directives stated by meeting the following standards:
type of product : kiln controller
mode specification series TM100, TC44, TC60, TC66, TC60/8, TC88,
TC2010, TC2044, TC2066, TC2088, TC405,
TC605, TC405/30, TC503, TC504, TC505, TC507,
TC-S1, TC-S2, TC-M2, DIGIT450/600/700
refering EU-regulations EG regulation low voltage (2006/95/EC)
EG regulation EMC (89/336/EEC)
applied harmonized standards: EN 61010 (LV directive)
EN 61000-6 (EMC supression)
EN 55011 Class B (EMC emission)
EN 61000-3-2/3 (EMC emission)
This product must be installed and operated by competent personnel. When this product is
connected to other components/machines, the builder/assembler must ensure that the whole
machine complies with the relevant EU Directives before use. Any unauthorized changes to
the product will result in this declaration becoming void.
Reinhard Bentrup, MD
Fernwald, 8. April 2008
Note: We reserve the right to make any
technical changes without prior notice
operating instructions bentrup TC20xx V1.9