Bentrup TC 2010 Bedienungsanleitung Seite 40

Table 9: infobox
Defines the process parameters displayed on the controller. Each infobox defines
one process parameter to show. See page 22 how to display these values
.
00: infobox type
Selects the kind of information shown on the infobox
SPACE: blank
VAL/VAL B/VAL2: Displays a process value
LOOP: Displays a loop status
DOx: Displays a group of 6 digital outputs
AOx: Displays an analog output
MOT: Displays position and movement of a servomotor output
STAT: Displays current process information
DIx: Displays a group of 3 digital inputs
AI: Displays an analog input
PRC.I: Displays current process information
KWH: Displays electrical power consumption
following parameters apply on selection VAL/VAL B/VALx2 only:
11: display value
Selects the process value to be shown
following parameters apply on selection LOOP only:
41: Loop info
Selects the loop to be shown
operating instructions bentrup TC20xx V1.9
(options END, SPACE, VAL, VAL B, VALx2,
CHAN, DOx, AOx, MOT, STAT, DIx, AI, PRC.I)
(value range SP00 to CH19)
(value range LP00 to LP01)
following parameters apply on selection DOx only:
51: DOx output
Selects a digital output to display
following parameters apply on selection AOx only:
61: AOx output
Selects an analog output to display
following parameters apply on selection MOT only:
71: step.mot.info
Used to display position and movement of a servomotor. Select the column
number of the digital output which must be defined for servomotor operation
following parameters apply on selection DIx only:
91: DIx digital input
Selects a group of 3 digital inputs to display
following parameters apply on selection AI only:
101: AIx analog input
Selects an analog input to display
following parameters apply on selection PRC.I only:
111: Process Information
Current process information
following parameters apply on selection KWH only:
121: power ratng.kw
Enter the total power of the kiln. The calculation assumes all zones having the
same amount of power
(value range DO0 to DO6)
(value range AO0 to AO1)
(value range SM0 to SM6)
(value range DI0)
(value range AI0 to AI1)
(value range SP00 to CH19)
(value range 0.0 to 99.9)
39