Auriol Z31130 Bedienungsanleitung Seite 18

Before use
Note: Do not move the weather station while it is receiving the signal. This may
disrupt reception.
Connecting the weather station with the outdoor sensor and the
DCF radio signal:
After removal of the battery safety strip the weather station attempts to establish a
connection with the outdoor sensor. This process can take a few minutes. On successful
connection with the outdoor sensor, the selected channel symbol appears in the
27
LC display with the channel of the outdoor sensor (if necessary you can change the
channel of the outdoor sensor as shown in the section "Setting the channel"). If the
connection with the outdoor sensor is not established automatically, this can be done
manually by pressing RESET button of the sensor.
43
As soon as the weather station has established a connection with the outdoor sensor
it automatically begins to receive the DCF radio signal. This process takes several
minutes and is indicated in the LC display by a flashing radio tower symbol .
5
When the DCF radio signal is being successfully received, the radio tower symbol
is shown permanently in the display. If at the time of putting the device into opera-
tion it is not possible to synchronise with the atomic clock, you can also carry out
the clock adjustments manually ("Setting the 12 / 24 hour mode / °C / °F / time
zone / time / date / language manually").
18 GB/CY