Cancelling The Preset Time Function; Cancelling The Post-Drying Programme - Sentiotec Pro B3 Montage- Und Gebrauchsanweisung

Instructions for use for the user
4. Once you have reached the required preset time, wait a few seconds.
► The sauna control unit changes to standby mode and the timer starts
running.
► The remaining preset time is shown in the temperature display
The temperature selector
minutes lash.
► Once the preset time has elapsed, the selected mode is started.
9.9.

Cancelling the preset time function

● Press and hold down the preset time button
preset time function.
► The preset time countdown is cancelled.
► Then the current temperature in the sauna room is displayed in the
temperature display
is displayed.

9.10. Cancelling the post-drying programme

after the combi-mode, the post-drying programme is started automatically. This in-
volves heating the sauna room to 80 °C with the fan running for 30 minutes. The
text "dry" appears in the temperature display
● Press and hold down the temperature selector
post-drying programme.
To prevent mound and rot from forming, the post-drying programme
should NOT be cancelled.
WORLD OF WELLNESS
3
and the point between the hours and
4
. In single-sensor mode, the preset temperature
7
for a second to cancel the
4
.
3
for a second to cancel the
p. 32/38
4
.