Changing The Preset Humidity; Setting The Preset Time - Sentiotec Pro B3 Montage- Und Gebrauchsanweisung

Instructions for use for the user
9.7.

Changing the preset humidity

You can change the preset humidity during operation any time.
● Turn the humidity selector
Turn the humidity selector
► The humidity selector
the humidity display
► Then the current humidity in the sauna room is displayed again in the
humidity display
the preset humidity is displayed.
9.8.

Setting the preset time

WARNING!
Risk of fi re
Flammable objects that are placed on the heater will ignite and cause i res.
● NEVER place l ammable objects on the sauna heater.
● Make sure that NO l ammable objects have been placed on the sauna
heater before you activate the preset timer function.
You can set the preset time in 15 minute intervals. The maximum preset time
totals 24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
1. Start the sauna mode or the combi mode (see point 9.4 and 9.5.)
2. Press the preset time button
► The temperature selector
is shown in the temperature display
3. Press the preset time button
intervals.
WORLD OF WELLNESS
2
to the right to increase the humidity.
2
to the left to decrease the humidity.
l ashes and the preset humidity is shown in
2
1
.
1
. If a humidity temperature sensor is not installed,
7
.
l ashes and the previously set preset time
3
7
, to increase the preset time in 15 minute
4
.
p. 31/38
EN