Use; Adding More Ingredients - Bosch MMBH4 Serie Gebrauchsanleitung

en Use
Pusher
To push ingredients that either stick to
the edge or do not blend well towards the
blender knife. To do so, turn the locking cap
anticlockwise, remove and place the pusher
into the opening. X "Using the pusher" see
page 19
Safety systems
The appliance has various safety systems.
X "Safety systems" see page 21

Use

W Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete and the blender
jug has been correctly positioned on to
the base unit.
– Never put your hand in the blender jug
once it is in place, and always put the lid
on before using the appliance.
Note: The appliance will only work if the
blender jug has been correctly positioned.
X Fig. B
1. Place the base unit onto a stable and
level work surface. Position the cushion
pad on to the base unit, observing the
recess.
Important: Never attach the blender jug
without the cushion pad.
2. Place the blender jug on to the cushion
pad. Make sure the blender jug is firmly
positioned on the appliance.
3. Put the desired ingredients into the
blender jug.
4. Put the lid with the locking cap in place
and press it firmly.
5. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting).
6. Plug the mains plug into the mains.
Switch on the appliance with the on/off
switch. All LEDs are lit.
7. Slowly turn the rotary switch clockwise
until the desired speed is reached. The
status LED lights up.
18
Note: Using the programme buttons
X "Automatic programmes" see
page 19.
8. Process the ingredients until the desired
consistency is achieved.
9. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting). Wait until the appliance
comes to a standstill.
10. Switch off the appliance with the on/off
switch. Disconnect the mains plug.
11. Remove the blender jug. Remove
the lid.
12. Pour the blended food into another
container.
Clean all parts. X "Cleaning and
maintenance" see page 20

Adding more ingredients

X Fig. C
1. Turn the locking cap in an anticlockwise
direction and remove.
2. Add more chopped or liquid ingredients
through the opening, remembering to
observe the maximum capacity.
3. Put on the locking cap and tighten it by
turning in a clockwise direction.
4. Process the ingredients until the desired
consistency is achieved.
X Fig. D
Adding larger quantities:
1. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting). Wait until the appliance
comes to a standstill.
2. Switch off the appliance with the on/off
switch. Disconnect the mains plug.
W Risk of injury!
Never remove the lid while the appliance is
plugged in.
3. Remove the lid.
4. Add the extra ingredients.
5. Replace the lid.
6. Plug the mains plug into the mains.
Switch on the appliance with the on/off
switch. All LEDs are lit.