How To Use Autoscale - PeakTech 1240 Bedienungsanleitung

33. How to use Autoscale

The function is applied to follow-up signals automatically even if the signals change at any time. Autoscale
enables the instrument to set up trigger mode, voltage division and time scale automatically according to the
type, amplitude and frequency of the signals.
The menu is as follows:
Function Menu
Autoscale
Mode
Wave
If you want to measure the two-channel signal, you can do as the follows:
1. Press Autoscale button, the function menu will appear.
2. Press H1 to choose ON.
Press H2 and choose
3.
4. Press H3 and choose
Fig. 77 Autoscale menu
Setting Instruction
ON Turn on Autoscale.
OFF Turn off Autoscale.
Follow-up and adjust the vertical and horizontal settings.
Follow-up and adjust horizontal scale without changing vertical setting.
Follow-up and adjust vertical scale without changing horizontal setting.
Show Multi-period waveforms.
Only show one or two periods.
for Mode item.
for Wave item.
-156-