How To Measure Automatically - PeakTech 1240 Bedienungsanleitung

28. How to Measure Automatically

Press the Measure button to display the menu for the settings of the Automatic Measurements.
The oscilloscopes provide 20 parameters for auto measurement, including Vpp, Vmax, Vmin, Vtop, Vbase,
Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay A→B
A→B ,+Width, -Width, +Duty, -Duty. That's 10 voltage and 10 time measurements in all.
The menu is displayed as Fig. 67.
The "Automatic Measurements" menu is described as the following table:
Function Menu
Add
Remove
Fig. 67 Measure Menu
Setting
Type
CH1
Source
CH2
Show all
Add
Remove all
Type
Remove
-148-
Description
Press F1 ,show the measure types
Select the source
Show all the measures on the screen
Add the selected measure types (shown at
the left bottom, you could only add 8 types at
most)
Remove all the measures
Turn M knob, select the types need to be
deleted.
Remove the chosen measure type
, Delay