How To Set The Display System - PeakTech 1240 Bedienungsanleitung

21. How to Set the Display System

Push down the Display button and the menu displayed in the screen is shown as Fig. 42.
The description of the Display Set Menu is shown as follows:
Function Menu
Type
Persist
XY Mode
Cymometer
VGA Disp
Display Type:
With the F1 menu selection button pushed down, you can shift between Vect and Dots types. The differences
between the two display types can be observed through the comparison between Fig. 43 and Fig. 44.
Fig. 42 Display Set Menu
Setting
Dots
Vect
OFF
1 second
Time 2 seconds
5 seconds
Infinity
Clear
ON
OFF
ON
OFF
ON
OFF
Fig. 43 Display in the Vector Form
-129-
Description
Only the sampling points are displayed.
The space between the adjacent sampling points in
the display is filled with the vector form.
Turn the M knob to set the persistence time
Clear the persistence
Turn on the XY display function;
Turn off the XY display function.
Turn on the cymometer ;
Turn off the cymometer.
Connect the VGA port to a monitor. If set it as ON,
the waveform could be displayed on the computer
monitor.