Basic Menu; Speaker Settings - Yamaha RX-V863 Bedienungsanleitung

1 BASIC MENU

Use this feature to manually adjust the basic speaker
settings. Most of the "BASIC MENU" parameters are set
automatically when you run the automatic setup.
1 BASIC MENU
.
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)TEST TONE
[ ]/[ ]:
[ENTER]:
y
Set "TEST TONE" to "ON" to output the test tone for the
"SPEAKER SET", "SP LEVEL" and "SP DISTANCE".

■ Speaker settings

y
To select the desired parameter, press 9 k / n repeatedly.
Extra speaker assignment EXTRA SP ASSIGN
Selects the function of the speakers connected to the
EXTRA SP terminals.
A)SPEAKER SET
X
X
X EXTRA SP ASSIGN
ZONE2
X
X ZONE B
NONE
X
X
X
X
XXXX[ ]/[ ]:Up/DownXXXXX ZONE2 SET
Not Available
XXXX[p]/[[]:EnterXXXXXXX
X
Choice
ZONE2 Select this setting when you use the Zone 2
speakers (see page 105).
FRONT B Select this setting when you use another front
speaker system in the main zone (see page 43).
ZONE B Select this setting when you use another front
speaker system in another room (see page 43).
PRESENCE Select this setting when you use the presence
speakers (see page 13).
NONE Select this setting when you do not use the
EXTRA SP terminals.
Notes
• This parameter shares the value with the "EXTRA SP
ASSIGN" parameter in "AUTO SETUP" (see page 33).
• If you select "ON" in "BI-AMP" (see page 110), you cannot
select "PRESENCE" or "ZONE2" in "EXTRA SP ASSIGN".
• After changing the "EXTRA SP ASSIGN" setting, carry out
"AUTO SETUP" again (see page 32).
Up/Down
Enter
A)SPEAKER SET
>FRONT B
PRESENCE
Descriptions
Customizing this unit (MANUAL SETUP)
LFE/bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
A)SPEAKER SET
LFE/BASS OUT
SWFR FRONT >BOTH
LFE signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH
Output
SWFR Output
FRONT No output
Low-frequency signals output
Subwoofer(s) and speakers
Choice
Subwoofer(s)
BOTH
*1
SWFR *4
FRONT No output
*1
Output(s) the low-frequency signals of the front
channels and other speakers set to "SMALL".
*2
Always output the low-frequency signals of the front
channels.
*3
Output the low-frequency signals if the speakers are set
to "LARGE".
*4 Outputs the low-frequency signals of the speakers set to
"SMALL" or "NONE".
Front Other
speakers speakers
No output No output
No output No output
Output No output
Front Other
speakers speakers
*2 *3
*3 *3
*1 *3
77
En