Selecting Decoders - Yamaha RX-V863 Bedienungsanleitung

Advanced sound configurations

Selecting decoders

■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi-
channels.
Set the operation mode selector to F AMP and
then press Q SUR. DECODE repeatedly on the
remote control to select the desired surround
decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
■ Decoder descriptions (SUR.)
Decoder
Pro Logic
PLIIx Movie
PLII Movie
PLIIx Music
PLII Music
PLIIx Game
PLII Game
Neo:6 Cinema
Neo:6 Music
y
When you select the surround decode mode for Dolby Digital, DTS or DTS 96/24 sources, this unit automatically selects "SURROUND
DECODE Dolby Digital", "SURROUND DECODE DTS" or "SURROUND DECODE DTS 96/24" program.
70
En
Dolby Pro Logic processing for any sources.
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources.
decoder is not available when "SUR.B L/R SP" is set to "NONE" (
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources.
decoder is not available when "SUR.B L/R SP" is set to "NONE" (
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for game sources.
is not available when "SUR.B L/R SP" is set to "NONE" (
DTS processing for movie sources.
DTS processing for music sources.
y
You can change the decoder parameter settings (see page 71). Set
the operation mode to F AMP and then press R PARAMETER
to display the decoder parameters in the OSD. Press 9 k / n
repeatedly to select the desired decoder parameter and then press
9 l / h repeatedly to change the value of the selected
parameter.
Descriptions
see page 78
The Pro Logic IIx
see page 78
).
The Pro Logic IIx
see page 78
).
The Pro Logic IIx decoder
).