Customizing This Unit (Manual Setup) - Yamaha RX-V863 Bedienungsanleitung

CUSTOMIZING THIS UNIT (MANUAL SETUP)

Customizing this unit (MANUAL SETUP)
You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Auto setup AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 32).
■ Manual setup MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Basic menu 1 BASIC MENU
Menu
A)SPEAKER SET
B)SP LEVEL
C)SP DISTANCE
D)TEST TONE
72
En
Parameter
EXTRA SP ASSIGN
Selects the function of the speakers connected to the EXTRA SP
speaker terminal.
LFE/BASS OUT
Selects the speakers that output the LFE (low-frequency effect) and the
low-frequency signals.
FRONT SP
Selects the size of the front speakers.
CENTER SP
Selects the size of the center speaker.
SUR. L/R SP
Selects the size and number of the surround speakers.
SUR.B L/R SP
Selects the size and number of the surround back speakers.
CROSS OVER
Selects the crossover frequency of all the speakers set to "SML" (or
"SMALL") in "SPEAKER SET" (see page 78).
SUBWOOFER PHASE
Switches the phase of your subwoofer if bass sounds are lacking or
unclear.
FR.L/FR.R/CNTR/
Adjust the balance the speaker levels between the front left or
SUR.L/SUR.R/
surround left speakers and each speaker selected in "SPEAKER SET"
SBL/SBR/SWFR/
(see page 77).
PR.L/PR.R
UNIT
Selects the unit to adjust the speaker distance.
FRONT L/FRONT R/
Adjust the distance of each speaker and the delay applied to the
CENTER/SUR. L/
respective channel.
SUR. R/SBL/SBR/
SWFR/PRNS L/
PRNS R
— Turns the test tone output on or off for the "SPEAKER SET", "SP
LEVEL", and "SP DISTANCE" settings.
Functions Page
77
77
78
78
78
78
79
79
79
80
80
80