Yamaha DVX-S120 Bedienungsanleitung Seite 53

Notes on the digital audio jacks
AMP
DVD/CD
VCR
TUNER
MOVIE MUSIC SPORTS
CINEMA
• The digital jacks are compatible with PCM, Dolby Digital and
• The OPTICAL IN jack is compatible with a digital signal that
• You can use "* Input Assign" in the SET MENU to assign
Set to VIDEO (default setting)
Press VIDEO on the Remote Control to input a signal from CD
recorder or MD recorder.
• When you assign the OPTICAL IN jack as VIDEO and equipment is
VIDEO
VIDEO
Set to VCR
Press VCR on the Remote Control to input a signal from CD
GAME
recorder or MD recorder.
VCR
• When you assign the OPTICAL IN jack as VCR and equipment is
For details about assigning OPTICAL IN jacks see page 88,
"Using the SET MENU". For details about input modes see
page 77, "Switching Input Modes".
• CinemaStation's digital and analog signal circuits are
• CinemaStation's optical digital jack is designed based on EIA
DTS signals.
has a 96 kHz or less sampling frequency.
VIDEO or VCR to the OPTICAL IN jack. The default setting
is VIDEO.
Advice
connected to the VIDEO IN jacks, the OPTICAL IN jack has priority
over the VIDEO IN jacks if the input mode is set to AUTO.
Advice
connected to the VCR IN jacks, the OPTICAL IN jack has priority
over the VCR IN jacks if the input mode is set to AUTO.
independent of each other, so analog input signals can only
output from analog output jacks and digital input signals can
only output from digital output jacks.
standards. If you use an optical cable that does not meet EIA
standards, it may not function properly.
Using Other Equipment
51