Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha DVX-S120 Bedienungsanleitung Seite 65

Dvd home theater sound system; dvd receiver
Vorschau ausblenden Andere Handbücher für DVX-S120:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

* CENTER
Sets whether the Center Speaker is present or not, and
sets the size of the Center Speaker.
Selection items: LRG (Large), SML (Small), NON
(None)
Default setting: SML
LRG: Select this setting when using a big Center
Speaker. The entire frequency band of the center channel
signal is output as it is from the Center Speaker.
SML: Select this setting when using a small Center
Speaker. A center channel signal with a low tone of 90
Hz or below is output from the speaker set to * BASS.
NON: Select this setting when not using a Center
Speaker. The center channel signal distributes the same
volume level to the Front L/R Speakers.
* FRONT
Sets the size of the Front Speakers.
Selection items: LARGE, SMALL
Default setting: SMALL
LARGE: Select this setting when using big Front
Speakers. The entire frequency band of the front L/R
channel signal is output as it is from the Front Left and
Right Speakers.
SMALL: Select this setting when using small Front
Speakers. A front L/R channel signal with a low tone of
90 Hz or below is output from the speaker set to *
BASS.
* SUR.
Sets whether the Surround L/R Speakers are present or
not, and sets the size of the Surround L/R Speakers.
Selection items: LRG (Large), SML (Small), NON
(None)
Default setting: SML
LRG: Select this setting when using big Surround L/R
Speakers or when using Surround L/R Speakers with
surround subwoofers connected by speaker cables.
The entire frequency band of the surround L/R channel
signal is output as it is from the Surround Speakers.
SML: Select this setting when using small Surround L/R
Speakers. A surround L/R channel signal with a low tone
of 90 Hz or below is output from the speaker set to *
BASS.
NON: Select this setting when not using Surround L/R
Speakers. The surround L/R channel signal distributes
the same volume level to the Front L/R Speakers.
Creating the Best Listening Space
* BASS
Selects the speaker to output a LFE/BASS (low tone)
signal. LFE stands for Low Frequency Effect and it is
used to output bands of 90 Hz and below when Dolby
Digital or DTS is active.
Selection item: SWFR (Subwoofer), FRONT, BOTH
Default setting: SWFR
SWFR: Select this setting when using a Subwoofer.
The LFE and low tone (90 Hz and below) sound from
other channels, depending on * CENTER, * FRONT and
* SUR. settings, are output from the Subwoofer.
FRONT: Select this setting when not using a
Subwoofer. The LFE and low tone (90 Hz and below)
sound from other channels, depending on * CENTER, *
FRONT and * SUR. settings, are output from the Front
L/R Speakers.
BOTH: Select this item to mix a low tone of 90 Hz and
below with a LFE channel when using a Subwoofer and
independent of the Front Speaker Sound mode setting.
The entire frequency band of the front L/R channel is
output from both the Front L/R Speakers and Subwoofer.
Sound can output from the Subwoofer during 2-channel
or Dolby Surround playback.
* F. Level
Selects the Front Speaker level.
When the Front Speaker volume level is extremely high
and out of alignment with that of other speakers, you can
lower the volume level and regain a balance.
Selection items: Nrm (Normal), -10 dB
Default setting: Nrm
Nrm: Usually this setting is selected.
-10 dB: Use this setting if the output level of the Center
or Surround Speakers is out of alignment with the Front
Speakers. The volume level of the Front Speakers
decreases 10 dB (about 1/3).
63

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dvr-s120

Inhaltsverzeichnis