Yamaha DVX-S120 Bedienungsanleitung Seite 97

Main Menu Submenu
Setup Access
1
TV*
Language
Audio Menu
Features
1
* Be careful when setting this menu item. If it does not match your TV, the menu and playback screen will not appear
properly or will not appear on the TV. If that happens, refer to "Recover TV settings" below.
2
* This unit can play PAL and NTSC, but your television must match the system used on the disc.
Recover TV settings
When the screen does not appear properly due to TV setting, perform the steps below to recover the setting.
1 Press DVD/CD.
2 Press s for 5 seconds. NTSC<->PAL appears in the CinemaStation Display.
3 Press e to switch the setting. NTSC/PAL SET appears in the CinemaStation Display.
When connecting with AV MONITOR OUT (U.K. and Europe models only)
1 Perform steps 1 and 2 above.
2 Press s again. YUV<->RGB appears in the CinemaStation Display.
3 Press e to switch the setting. YUV/RGB SET appears in the CinemaStation Display.
Setting Item
Disc Lock Set the Disc Lock "On"/"Off". Page 82
Parental level Adjust the level from 0 to +8. Page 81
Enter PIN
Enter the password. Page 80
Change PIN Change the password. Page 81
TV shape Set to match your TV screen aspect.
4:3 panscan
4:3 letterbox
Wide-screen (Widescreen)
TV System Set the video signal system*
Set to AUTO when using a TV compatible with
both NTSC and PAL.
Video Output (U.K. and Europe models only) Sets the output
signal of AV MONITOR OUT jack to YUV or
RGB.
Default Sub-title
Set the language you usually select for subtitles.
(Default Subtitle) When playing a disc, the subtitles in the selected
language appear first. When the disc does not
contain the selected subtitle language, no subtitle
appear.
Select the country where you use CinemaStation.
Country
Menu Language
Set the language for the On Screen Menu.
Default Audio Set the language you usually select for audio.
When playing a disc, you hear the audio in the
selected language first. When the disc does not
contain the selected language you selected, it will
play in another language.
Select the output signal for the OPTICAL OUT
Digital output
jack. The speaker sound changes depending on
the setting for this menu item.
All: Outputs all types of digital signals that
CinemaStation can reproduce.
PCM Only: Outputs the Pro Logic decoded
signal only.
Set Playback Control "On"/"Off". If set to "Off",
PBC
the Disc Menu does not appear on the TV screen.
Using the On Screen Menu
Setting Content
2 to match your TV.
95