Storing Your Own Sound Modes - JVC KD-SH9101 Bedienungsanleitung

Storing your own sound modes

You can adjust the sound modes to your preference
and store your own adjustments in memory
(USER 1, USER 2 and USER 3).
1
Press SEL (select) twice to show the
sound mode selection screen.
The last selected sound mode is
SEL
called up.
Ex. When "R & B" is selected previously
2
Press the number button to select
one of the sound modes listed on
the display.
1 2
• This unit has two sound mode selection
screens. To move to the other screen,
press 5 (up) or ∞ (down).
3
Enter the sound adjustment mode.
36
3 4 5
The following sound mode
adjustment screen appears
on the display.
4
Make adjustments as you like.
Buttons used for adjustments
Press ¢
1)
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
Press 5 (up) or ∞ (down) to adjust the
2)
level of the selected band within the
range of –05 to +05.
3)
Repeat steps 1) and 2) to adjust the
other frequency bands.
5
Store the adjustment you made.
SEL
6
If you want to cancel the adjustment,
press DISP (D).
• Adjustment you made remains effective
until you select another sound mode.
6
Press number button 1, 2 or 3 to
select one of the user sound modes
(USER 1, USER 2, or USER 3) you
want to store into.
1 2
Ex. When you select "USER 1."
4 to select the
or
The confirmation message
appears—whether you want to
store the adjustment.
3 4 5 6