External Component Operations; Playing An External Component - JVC KD-SH9101 Bedienungsanleitung

EXTERNAL COMPONENT OPERATIONS

SRC
ATT

Playing an external component

You can connect an external components to the
LINE IN plugs on the rear.
• If you cannot select "LINE IN" as the source,
change the "Line In" setting to "On." (See page
49.)
1
Select the external component
(LINE IN).
Each time you press the
button, the source changes
SRC
as described on page 7.
When you select a source,
the power automatically
comes on.
If you have assigned a different name to the
external component, it will appear.
2
Turn on the connected component
and start playing the source.
D
DISP
SEL 1 2 3 4 5 6
3
Adjust the volume.
ATT
4
Select the DSP mode and sound
mode as you want.
• For the DSP modes, see page 32.
• For the sound (iEQ) modes, see page 35.
Note:
When the source is "LINE IN," the DISP (D) button
will not work.
T/P
MODE
M
61