JVC KD-SH9101 Bedienungsanleitung Seite 65

2
Select the DAB band (DAB1, DAB2,
or DAB3).
1 Press and hold SRC for more
SRC
than 1 second.
The band indication on the
display starts flashing.
2 Within about 5 seconds (while
DAB1
the band indication is
DAB3
flashing), press SRC again.
DAB2
Each time you press the
button, the band changes.
3
Select the number (1 – 6) for the
preset DAB service (primary) you
want.
1 2 3
Note:
If the selected primary service has some secondary
services, pressing the same number button repeatedly
will tune in to the secondary services.
Selecting a preset service using the
preset service list
If you forget what services are stored in what
preset number, you can check the preset service
list, then select your desired service on the list.
1
Select the DAB tuner.
Each time you press the button,
SRC
the source changes as described
on page 7. When you select a
source, the power automatically
comes on.
4 5 6
2
Select the DAB band (DAB1, DAB2,
or DAB3).
1 Press and hold SRC for more
SRC
than 1 second.
The band indication on the
display starts flashing.
2 Within about 5 seconds (while
DAB1
the band indication is
DAB3
flashing), press SRC again.
Each time you press the
DAB2
button, the band changes.
3
Press and hold 5 (up) or ∞ (down)
until the preset ensemble (primary
service) list for the current band
(DAB1, DAB2, or DAB3) appears on
the display.
Note:
You can show the other DAB band preset
ensemble (primary service) lists (DAB1, DAB2,
or DAB3) by pressing 5 (up) or ∞ (down).
4
Select the number (1 – 6) for a
service you want.
1 2 3 4 5 6
65