Storing Your Own Sound Modes - JVC KD-PDR61 Bedienungsanleitung

B
Subwoofer
1
Press number button 1 (
move to the "Subwoofer" adjustment
display.
4
2
Use
frequency to the subwoofer.
• OFF: All signals are sent to the
subwoofer.
• 80Hz: Frequencies higher than 80 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
• 160Hz: Frequencies higher than 160 Hz
are cut off.
3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4
Press number button 1 (
to select the subwoofer phase.
[0deg (normal) or 180deg (reverse)]
C
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
D
Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own
adjustments in memory.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
) to
¢
/ to select a cutoff
)
2
Select a sound mode.
3
Select a frequency range.
4
Adjust the sound elements of the selected
frequency range.
5 ∞
1
Use / to adjust the level.
2
Press number button 5 (
the control dial to select the frequency.
3
Press number button 5 (
the control dial to select the quality slope (Q).
Range/selectable items
Sound
elements
Low
Frequency
100 Hz
200 Hz
Level –6 to +6 –6 to +6 –6 to +6
Q (Q-slope) Q1.0
Q1.25
Q1.5
Q2.0
5
Repeat steps 3 and 4 to adjust the other
frequency bands.
6
Store the adjustments.
), then turn
), then turn
Mid High
60 Hz 500 Hz 10 kHz
80 Hz 1 kHz 12.5 kHz
1.5 kHz 15 kHz
2.5 kHz 17.5 kHz
Q0.5 Fix
Q0.75
Q1.0
Q1.25
SETTINGS 27