JVC KD-SH9101 Bedienungsanleitung Seite 23

• Display indications when inserting an
audio CD or a CD Text:
1
5
1 Total track number
2 Total playback time of the disc
3 Disc title/performer (if no title is recorded or
assigned*, "No Name" appears.)
4 Track title (if no title is recorded, "No Name"
appears.)
5 Current track number
6 Elapsed playing time of the current track
* If a name has been assigned to the audio CD (see
page 51), it will be shown on the display.
Notes:
• When a disc is already in the loading slot, selecting "CD" as the source starts disc play.
• The unit cannot read or play an MP3 track without the extension code <mp3>, and a WMA track
without the extension code <wma>.
• When a disc is inserted upside down, the disc automatically ejects.
• If you change the source, playback also stops (without ejecting the disc).
Next time you select "CD" as the source, disc play starts from where it has been stopped previously.
To return the control panel to its previous
position, press 0 again.
• If you keep the loading slot open for about 1
minute, (beeps sound when the "Beep" setting
is turned "On"—see page 49) the control panel
returns to its previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
• Display indications when inserting an
MP3 or a WMA disc
2 3 4
6
1 Total folder number
2 Total track number
3 Disc type—MP3 or WMA
4 Album name/performer (or folder name
"Tag" is set to "Off"—see page 49, or when no Tag
is recorded)
5 Track title (or track name
"Off"—see page 49, or when no Tag is recorded)
6 Current folder number
7 Current track number
8 Elapsed playing time of the current track
Note:
If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to prevent it from dust. (Disc will not play
this time.)
1 2
3 4
6 7
when "Tag" is set to
5
8
when
23