JVC KD-SH9101 Bedienungsanleitung Seite 33

3
Adjust the DSP effect level—1, 2, or
3.
The selected DSP effect
level is valid for all DSP
ATT
modes except "V.CANCEL."
• As the number increases,
Ex. When "Dome" is selected in the previous step
To cancel the DSP modes, select "DEFEAT" in
step 2 .
To exit from the DSP mode selection screen,
press SEL (select) repeatedly or wait for about 15
seconds.
the effect level becomes
stronger.
To make further precise settings for the
DSP modes
You can also make further precise settings to
make the best sound field in your car
compartment. These settings you make are valid
for all DSP modes except "V.CANCEL."
Setting items:
The number of the built-in speakers :
Select the number of the speakers built
in your car—"2ch" or "4ch."
• When you have four speakers (4ch)
built in your car, select your car size
(see step 5 on page 34).
Listening seat position:
Select the listening seat position where
you want to locate the sound image.
1
Press SEL (select) once to show the
DSP mode selection screen.
The currently activated DSP
mode appears on the display.
SEL
Ex. When "Dome" is selected previously
• If the DSP mode is not activated
("DEFEAT" is selected), you cannot go to
the next step. Select one of the DSP
modes first.
CONTINUED ON THE NEXT PAGE
33