Operation; Setting The Time / Date Manually - Auriol Z29962E Bedienungsanleitung

If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
j
If the weather station does not work properly, you
can restart it by pressing the ADJUST button
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
tinues, you can also set the time and date manually
(see "Setting the time / date manually").

Operation

Q 
Reception of the DCF radio signal may be disrupted
or interrupted at the location of the weather station.
In this case you are able to set the instrument
manually.

Setting the time / date manually

Q 
1. Press and hold the CLOCK button
3 seconds. The hours on the time display
begin to flash.
2. Press the ADJUST button
number.
for approx.
14
to set the required
12
GB/IE/CY
.
12
10
17